CNC Machining Units by Drillmatic can perform any type of axial machining, such as drilling, threading, reaming, counterboring, etc ... The feed axis can be moved by means of a ball screw and CNC motor allows an effective and precise management of the stroke. The basic version involves the use of a three-phase motor for spindle rotation. However, it is possible to set up the unit with two brushless motors to perform CNC interpolation. The great modularity and the different connection, motor and transmission configurations allow the customer to better adapt the unit to the application.

Image	SKU	Name	Stroke [mm]	Motor 2P [Kw]	Motor 4P [Kw]	Motor 6P [Kw]	Drilling capacity on steel R=60 ø mm	Min.speed [rpm]	Max. speed [rpm]
	DXE10.60	CNC Machining units	60	0,75	0,55	0,55	10, M12	400	8400
	DXE10.130	CNC Machining units	130	0,75	0,55	0,55	10, M12	400	8400
	DXE16.90	CNC Machining units	90	1,5	1,5	1,1	16, M20	160	4500
	DXE16.130	CNC Machining units	130	1,5	1,5	1,1	16, M20	160	4500
	DXE23.115	CNC Machining units	115	1,5	1,5	1,1	25, M30	300	4000
	DXE24.120	CNC Machining units	120	3	2,2	2,2	26, M30	300	4000
	DXE42.160	CNC Machining units	160	3	2,2	2,2	38, M40	160	4000

FEATURES

• Feed by means of ball screw
• 3 Mechanical sensors for stroke adjustment
• Spindle supported by a set of taper roller bearings
• Three-phase motor usable inverter
• Concentricity 0,02mm

ACCESSORIES

• Speed reducer
• Provision for 2 CNC motors
• Multi spindle heads